Konica Minolta CR-400 Instruction Manual page 97

Input range: 0.01 ≤ X, Y, Z ≤ 160
[Example]
Setting L*=60.72, a* = +10.32, and b* = +12.21 to color dif-
ference target color number T00 should be input as right.
Select "TARGET VALUE" using the
5
the color difference target color data using the
key and numeric pad.
For L*a*b* or Hunter Lab, the symbols for a* and b* or a and b are changed using the Symbol
key when the cursor is at the data position for a* and b* or a and b. The cursor does not move
to the symbols position for a* and b* or a and b.
• If no color difference target color name is to be selected, pro-
ceed to step 7.
• Select "Print" using the
6 Once measurement is complete, select "TARGET
to print the target value.
NAME" using the
target color name using the
(How to set the color difference target color name)
1) Select input mode using the
pad.
• The input modes change in the following order: upper case Latin letters → lower case
Latin letters → numbers.
2) Move the cursor using the
the numeric pad.
• The name is up to 9 characters (see P.20 "As input keys" for details.)
• Settings are complete, complete sound beeps and the display returns to the measurement screen.
Settings are now finished. Other color difference target color numbers can be set by repeating the
above procedure.
Once settings are complete, press the Measure/Enter key
7
key, and set
key, and then press the Print key
key and set the color difference
key and the numeric
key.
key and input the color difference target color name using
Setting screen
Setting the color difference
target color name (example)
.
95