Konica Minolta CR-400 Instruction Manual page 46

Color Difference Measurement
• Measuring overwrites the color difference target color data to color difference target color
name T00.
If the target color overwriting confirmation option is set to ON (see P.28), a confirmation
message appears, asking whether existing data is to be overwritten. Then, press the Enter key
5
Press the measurement button of the measuring head after making sure the ready
Do not move the measuring head during measurement.
lamp is ON.
• Previously stored color difference data is not changed.
6
Place the measuring head vertically above the speci-
men.
44
Color difference target
color setting screen
⇒
Measurement screen
(previous measurement data)
.