Konica Minolta CR-400 Instruction Manual page 123

This judges whether or not the value of the measured color difference is within the range of the ∆E set
for the color difference target color.
∆E is displayed as followings depending on set color spaces.
∆E*, ∆E, ∆E94, ∆E99, ∆E00, CMC
Set a color difference target color ahead of time before setting ∆E.
∆E
Selecting the limit value in P.114 displays the [limit value] selection screen.
5,7
[Operating Procedure]
1 Use the key to select a color difference target
color.
• The tolerance type screen appears.
2 Press the Measure/Enter key
3 Select the "∆E*" as the tolerance type.
• The limit value setting screen will appear.
• If ∆E is already set, go to step 6 as the set color difference
tolerance data is displayed.
4 Press the Measure/Enter key
.
.
1,3,5,7
2,4,6,8
Selection screen
Tolerance type screen
Setting screen
121