Konica Minolta CR-400 Instruction Manual page 94

Color Difference Measurement
Place the measuring head vertically above the color
5
difference target color specimen.
• A new color difference target color is set.
• When not setting a new color difference target color, measur-
ing overwrites the color difference target color data.
Press the Measure/Enter key
6
Do not move the measuring head during measurement.
ment button on the measuring head) after making sure
the ready lamp is ON.
• If no color difference target color name is to be selected, pro-
ceed to step 8.
• Select "Print" using the
Once measurement is complete, select "TARGET
7
to print the target value.
NAME" using the
target color name using the
pad.
(How to set the color difference target color name)
1) Select input mode using the
• The input modes change in the following order: upper case Latin letters → lower case
Latin letters → numbers.
2) Move the cursor using the
the numeric pad.
• The name is up to 9 characters (see P.20 "As input keys" for details.)
• Settings are complete, complete sound beeps and the display
returns to the measurement screen.
Settings are now finished. Other color difference target color numbers
can be set by repeating the above procedure.
8 Once settings are complete, press the Measure/Enter
key .
92
(or the measure-
key, and then press the Print key
key and set the color difference
key and the numeric
key.
key and input the color difference target color name using
Setting screen
Setting the color
difference target color
name (example)
Measurement screen