Setting The Displayed Color Limit - Konica Minolta CR-400 Instruction Manual

Basic Setting
<Setting the Displayed Color Limit>
This setting selects the color space to be displayed.
See P.79 "Color Space and Changing the Display" and P.80 "Color Space and Color Difference Set-
ting" for details on the setting conditions.
6
• The item setting screen will appear.
[Operating Procedure]
Press the Index Set key
1
screen.
Select "DISP. LIMIT" using the
2
• The displayed color limit screen appears.
Press the Measure/Enter key
3
• The color space being displayed in the measurement screen
4 Select a color space using the
cannot be turned OFF.
See P.75 "CMC Parameter Setting" for details on CMC pa-
rameter setting.
• The page can be changed by pressing the
• The page can be changed by keeping the
Press the Measure/Enter key
5
each color space.
• This may be three pages long if a user index is registered in
connected measuring head.
(See P.127 "User Index".)
Once the settings are complete, press the Escape key
6
to return to the measurement screen .
74
1
while in the measurement
key.
.
key.
to turn ON and OFF
2,4
3,5
key.
key pressed.
Displayed color limit
screen (Page 1 of 2)
Displayed color limit
screen (Page 2 of 2)