Konica Minolta CR-400 Instruction Manual page 75

4
• The index set screen is displayed.
1
[Operating Procedure]
1 Press the Index Set key
screen.
Select the item to set using the
2
• Pressing the Measure/Enter key changes the setting value in
the table on P.72 for each setting.
• See P.74 "Setting the Displayed Color Limit" for details on the
displayed color limit.
• The page can be changed by pressing the
3 Press the Measure/Enter key
• The page can be changed by keeping the
ting.
• Pressing the Measure/Enter key in remote mode changes to
the PC connection mode. (See P.129 "Changing to Remote
Mode".)
4 Once the basic settings are complete, press the Es-
cape key to return to the measurement screen.
while in the measurement
key.
key.
to change each set-
key pressed.
2
3
(Page 1 of 2)
(Page 2 of 2)
73