Names And Functions Of Parts; Measuring Head - Konica Minolta CR-400 Instruction Manual

Names and Functions of Parts

<Measuring Head>
1. Power switch
2. RS-232C terminal
3. AC adapter terminal
4. Measurement button
5. Battery chamber cover
6. Light projection tube
*
7. LCD
8. Ready lamp
9. Tripod socket
10. Wrist strap attachment
WARNING : Do not remove covers.
WARNUNG : Niemals das gehäuse öffnen.
(Do not disassemble or modify the instrument.)
: Turns ON and OFF the power.
: Connect the optional USB-Serial Converter Cable * or the optional RS-
232C cable here to transmit data back and forth between the measuring
head and the data processor or a PC. (* Included amongst the standard
accessories when the measuring head and data processor are purchased
as a set.)
: Connect the connector plug for the AC Adapter (AC-A305) here when
using the adapter.
: Press this to measure.
: Open and close when replacing batteries. When inserting the 4 AAA
size batteries, make sure their polarity orientation is as shown.
: The CR-400 light projection tube can be replaced with the optional CR-
A33a, c, d, and f light projection tubes. The CR-410 light projection
tube can be replaced with the optional CR-A33e light projection tube.
: Displays measurement data and setting items.
: Ready to measure (and fully charged) when green. Always check the
lamp before measuring.
: For attaching a tripod to fix the measuring head.
: The wrist strap is attached.
15