Konica Minolta CR-400 Instruction Manual page 31

• The menu screen appears.
Operating Procedure
Press the Input key
1
start-up screen is displayed (approx.
2 seconds) after the power is turned
ON.
Move the cursor using the
2
ting item.
• Pressing the Enter key
• For 4) PC mode, pressing the Enter key
(See P.50 "Changing to PC Mode")
• For "5) Option", pressing the Enter key
Enter key is pressed, the ON/OFF setting alternately changes. If you press the Escape key
the system registers the current ON/OFF setting, and returns to the menu screen.
• Changes are confirmed once they are changed.
3
Press the Enter key
• The display returns to the measurement screen.
4
Once settings are complete, press the Escape key
while the
Start up screen
key to select the set-
changes the setting values in the table above for each item.
switches to PC connection mode.
displays the option setting screen. Every time the
to change the settings.
Menu screen
⇒
Menu screen
.
,
29