Konica Minolta CR-400 Instruction Manual page 124

Optional Setting
Input ranges for the set values
(Tolerance)
(Offset)
(Rotation)
(Warning level)
Set the ∆E using the
5
• The warning level setting screen appears.
6 Press the Measure/Enter key
• Once ∆E setting is complete, the measurement screen appears.
• Measurement points within the color difference tolerance are
7 Set the warning level using the
plotted as O, warning level points are plotted as ∆, and points
meric pad.
out of the color difference tolerance are plotted as X.
8 Press the Measure/Enter key
122
Y: 0.01 to 99.99, xy: 0.0001 to 0.9999, other than Yxy: 0.05 to 80.00
-5.00 to +5.00 (should be within to tolerance)
-45 to +45
10 to 100%
key and the numeric pad.
.
key and the nu-
.
Setting screen
Measurement result