Setting The Multi-Calibration - Konica Minolta CR-400 Instruction Manual

<Setting the Multi-calibration>
This sets the multi-calibration function which corrects indicated values using both white calibration
and user calibration data.
When setting or canceling multi-calibration, you must set the color difference target color
again.
The color difference target color is not corrected using user calibration performed after mea-
surement.
• See P.145 for details on multi-calibration.
• Multi-calibration cannot be set if white calibration and user calibration are not done ahead of time.
1
• The option selection screen appears.
[Operating Procedure]
Press the Option key
1
screen.
Select "MALTI CAL." using the
2
while in the measurement
key.
2,4
3,5
Selection screen
135