Selecting The Measuring Button Function - Konica Minolta CHROMA METER Instruction Manual

Selecting the Measuring Button Function

You can select the function of the Measuring button from "Standard" and "Toggle." The
former performs measurement while the button is pressed and holds the last value when
the button is released; and the latter starts measurement when the button is pressed and
continues it until the button is pressed again.
* Measuring button function selection: Standard or Toggle
* Factory setting: Standard
Operating Procedure
1.
While the measurement screen is
displayed, press the MENU key.
The setting screen is displayed on the LCD
screen.
2.
Press the RIGHT key or LEFT key to
display the [Options] screen.
3.
Press the UP key or DOWN key to
select [Meas. Button] and then press
the ENTER key.
5
1
44
[Meas. Button]
3
3, 4
2
[Options] -