Setting The Default Color Difference Tolerance (Tolerance (Def.)) - Konica Minolta CM-700d Instruction Manual

Setting the Default Color Difference Tolerance (Tolerance (Def.))

With the CM-700d/600d, you can preset and save tolerances which do not depend on the target color data
as default values. During measurement, just selecting the tolerance No. allows automatic judgment using
the target colors and tolerances.
M
emo
• If tolerances for each target color have not been set, the tolerance setting for the registration number selected
during measurement (initial value: 01) is used as the tolerance setting for each target color.
• Up to 8 default tolerance settings can be specified to registration numbers 01 to 08. Tolerances have been factory-
set to registration number 01 only. You need to set tolerances for registration numbers 02 to 08 as necessary.
• With the optional Color Data Software "SpectraMagic™ NX", you can set or use the color difference tolerance
easily.
N
ote
Registration 01 for tolerance settings is set as the initial setting at the time of shipment from the factory, and
contains default settings for tolerance items. Even if the display conditions (such as color space or color
difference equation, index, etc.) are changed, the tolerance setting items will not be automatically changed.
If it is desired to set tolerance values according to the currently set display conditions, either delete the currently
set tolerance settings and then create new tolerance settings, or create new tolerance settings for a registration
number for which tolerances have not yet been set and select that registration number.
[Setting Procedure]
1
Hold down the [MENU] button and press the
button of the cross key.
The <Option> screen is displayed.
2
Use the or
move the cursor to "Tolerance(Def.)" and
then press the [SAVE/SEL] button.
The <Tolerance(Def.)> screen is displayed.
button of the cross key to
E-59