Control Byte And Status Byte Assignment - Festo CPX-CMIX-M1-1 Manual

3. Commissioning

3.3.1 Control byte and status byte assignment

CCON
Assignment of the control byte CCON (byte 4)
CCON B7
PARAM1
Parameters
Tab. 3/4: Byte 4 of the module output data of the CMIX: CCON
SCON
Assignment of the status byte SCON (byte 4)
SCON B7
ERROR
Errors
Tab. 3/5: Byte 4 of the module input data of the CMIX: SCON
3-6
With the control byte (CCON), the number format and output
mode of the CMIX are controlled as well as the performance
of the commissioning functions.
B6 B5
PARAM0 LOAD_P
Load
para-
meters
The status byte (SCON) reports the condition of the CMIX.
B6 B5
– ACK
– Para-
meter
accepted
B4 B3
REF RESET
Set Acknowl-
reference edge
point error
B4 B3
REF_OK ERROR3
Refe- Error code
rence
point set
B2 B1
MODE FORMAT
Mode Number
format
B2 B1
ERROR2 ERROR1
Festo P.BE-CPX-CMIX-EN en 1208a
B0
UNIT
Unit
B0
ERROR0