Mounting The Casm - Festo CPX-CMIX-M1-1 Manual

2. Fitting and installation
2.4 Mounting the CASM-... sensor interface
1
Fastening screw
(connect earthing)
Fig. 2/2: Mounting the CASM-...
1
H-rail
Fig. 2/3: Mounting the CASM-... on H-rails
Festo P.BE-CPX-CMIX-EN en 1208a
Mount the CASM-... sensor interface on an even surface with
two M4 bolts and one retaining washer each; see Fig. 2/2.
The symbol marks the position of the fastening screws.
The outer fastening screw serves at the same time for
1
earthing ( ).
Tightening torque: 2 Nm.
1
Fastening on H-rails as per EN 60715 is possible with
mounting kit type CP-TS-HS35; see Fig. 2/3.
1
2-9