Festo CPX-CMIX-M1-1 Manual page 111

B. Configuration with CPX node
File type File name
EDS cpx_chassis.eds
EDS cpx_fb11...eds
EDS cpx_...eds
ICO cpx_...ico
Tab. B/13: Configuration files (modular EDS) for the CPX terminal for DeviceNet
Installing modular
EDS files
Icon files
Festo P.BE-CPX-CMIX-EN en 1208a
Installing a modular EDS file
You will require the following files for the CPX terminal:
Language Description
English Base file for modular EDS.
English Provides the communication adapter in the
configuration program.
English There is an EDS file for every module type.
It contains the information needed for
configuration and parameterisation.
– Icon file for representing the CPX terminal or
mode in the configuration program.
Install the files with your configuration program.
•
You must install at least the Chassis EDS and the EDS files of
the required modules.
Recommendation: Install all EDS files.
Depending on the configuration program used, you can
assign icon files (.ico format) to the CPX terminal or the CPX
modules. The CPX terminal or the modules will then be
represented accordingly in the configuration program.
Notes on installing the EDS files and the icon files can be
found in the documentation for your configuration program.
B-25