Process Data Assignment Via The Cmd Software (Byte Swap) - Festo Compact Performance CP-FB6-E Manual

2. Commissioning

2.4.3 Process data assignment via the CMD software (byte swap)

As from version 4, the CMD software offers the possi-
bility of assigning each input/output of a CP system bit-
by-bit to any input/output in the PLC/IPC within the con-
figured address range. In order to do this, proceed as
follows:
• Insert a valve terminal into your bus structure
• Use the right-hand mouse key to open the dialogue
• Select the option "Process Data."
Fig. 2/9: Select option for entering the process data
2-24
(necessary steps see section 2.2.2 "Bus configura-
tion via the CMD software").
window of the valve terminal which you have inser-
ted.
CP FB6-E 9809c