2. Fitting and installation
2.3.2 Drive and displacement encoder
Drive
Displacement encoder
DGCI, DDLI
Permanently installed or
integrated displacement encoder.
DGP(L)
External displacement encoder of
type MLO-POT-...-TLF
DNCI, DDPC Integrated displacement encoder
DNC
External displacement encoder of
type Type MLO-POT-...-LWG
DNCM
External displacement encoder
already mounted on delivery
DSMI
Integrated displacement encoder
Tab. 2/2:
Notes on mounting the displacement encoder
2-8
Tab. 2/2 provides notes on mounting the measuring system.
Mounting instructions
–
•
For safe and quick mounting of the measuring
system: Use the BB-TLF-DGPL-... mounting kit.
•
Mount the measuring system electrically
isolated on the mounting surface using the
clamping brackets provided.
When used under difficult environmental
conditions (dusty environment):
•
Mount the measuring system with the actuator
slide facing downwards. The drip edge on both
sides prevents excessive dirt from forming on
the running surface.
–
–
•
Always leave the measuring system mounted
on the standard cylinder
•
Observe the notes in the operating manual
–
Festo P.BE-CPX-CMIX-EN en 1208a