Festo CPX-CMIX-M1-1 Manual page 16

Contents and general safety instructions
Module/Component – Type
CPX-CMIX-M1-1
CASM-S-D2-R3
CASM-S-D3-R7
DGCI,
DDLI
DGP(L)-... with
MLO-POT-...-TLF
DNCI,
DDPC-...
DNC-... with
MLO-POT-...-LWG
DNCM-...
DSMI-...
1)
Support for other drives in preparation
Tab. 0/2: Overview of modules and components
XIV
This manual contains information about the following
modules and components:
Description
CMIX measuring module with 7-segment display as well as a
connection to the sensor interface or measuring system.
The CMIX is a CPX module (technology module) in a CPX
terminal.
Sensor interfaces with connection to the CMIX, for connecting
special displacement encoders to the axis string:
– Analogue, absolute measuring system (potentiometer)
– Digital, incremental measuring system
Permissible drives with displacement encoders:
– Linear drive with permanently installed or integrated
displacement encoder (digital, absolute)
– Linear drive with external displacement encoder
(analogue, absolute – potentiometer)
– Standard cylinder with integrated displacement encoder
(digital, incremental)
– Standard cylinder with external displacement encoder
(analogue, absolute – potentiometer)
– Standard cylinder with external displacement encoder
(analogue, absolute – potentiometer)
– Semi-rotary drive with integrated displacement encoder.
(analogue, absolute – potentiometer)
1)
Festo P.BE-CPX-CMIX-EN en 1208a