Cpx-Fb11 (Devicenet); Configuring Devicenet Station Properties (Eds - Festo CPX-CMIX-M1-1 Manual

B. Configuration with CPX node
B.3

CPX-FB11 (DeviceNet)

B.3.1 Configuring DeviceNet station properties (EDS)
Reference source
B-24
General information on configuration is provided in the
CPX-FB11 manual (type P.BE-CPX-FB11-...).
When starting up a new DeviceNet station for the first time,
you must inform your configuration program about certain
properties of the station.
The features of the various slaves are usually administered by
the configuration program in a list or library e. g. EDS library
(EDS for electronic data sheets).
The following possibilities can be used with a CMIX:
Install an EDS file: Modular EDS.
–
Parameterising of technology modules such as the CMIX
is only supported via modular EDS.
– Manually enter the slave features (no parameter setting
possible).
Observe the notes in the manual for the CPX-FB11.
Reference source for EDS files
Current EDS files, icon files and information on the EDS files
can be found under the following address in Internet:
www.festo.com
Software, Drivers and firmware
Downloads Download Area:
Enter search term: CMIX
Festo P.BE-CPX-CMIX-EN en 1208a