Parameterising; B.3.2 Parameterising - Festo CPX-CMIX-M1-1 Manual

B. Configuration with CPX node

B.3.2 Parameterising

B.3.3 Addressing
B-26
The CMIX does not have any module parameters.
Assign the I/O addresses of the slave (RSNetworx example)
1. Double-click on the scanner in the network. A dialogue
box will open.
2. With the registers "Input" and "Output", you assign the
I/O addresses of the CPX terminal to the PLC operands.
Fig. B/11: Output address assignment
Festo P.BE-CPX-CMIX-EN en 1208a