Function Of The Cmix; Cmix In The Cpx Terminal - Festo CPX-CMIX-M1-1 Manual

1. Overview CPX

1.1.2 Function of the CMIX

1.1.3 CMIX in the CPX terminal

1-4
The CMIX measuring module, in combination with a drive with
a displacement encoder, permits recording and further
processing of the absolute position values or speed values of
the connected drive (see section 1.2).
When an incremental measuring system is used, the
measuring system must be referenced after switch-on.
When a potentiometer measuring system is used, drive
length/swivel angle as well as minimum and maximum
position must be entered.
The CMIX is integrated into a CPX terminal as a CPX module
and is controlled by the CPX node (bus node or FEC) via the
internal bus using 6 module output bytes and 6 module input
bytes, see section 3.3.
Information on commissioning the CMIX via the CPX bus node
or CPX-FEC is provided in chapter 3.
Festo P.BE-CPX-CMIX-EN en 1208a