Installing The Module In The Control Cabinet; Installing The Module To Din Rail; Illustration Of Installation Inside The Control Cabinet; Environmental Temperature In The Control Cabinet - Delta Electronics DVP15MC11T Operation Manual

5.2

Installing the Module in the Control Cabinet

5.2.1

Installing the Module to DIN rail

Pull down the clips at the bottom of DVP15MC11T. Then stick the horizontal slots at the rear of the module on
the DIN rail. Finally, push up the clips to fix the module inside the control cabinet.
5.2.2

Illustration of Installation Inside the Control Cabinet

5.2.3

Environmental Temperature in the Control Cabinet


Requirements
1. The environment inside the control cabinet for DVP15MC11T is 0°C ~ 55°C in temperature and 5 ~
95% in humidity.
2. Please do not make the installation near the equipment of high temperature.
DVP1 5 MC 1 1 T P W R C A N R S 2 32 00 0 1 02 03 0 4 05 06 0 7
R U N R U N 1 R S4 8 5
E R R E R R L A N 1 10 11 12 13 1 4 15 16 1 7
R U N 2
S D E R R L A N 2 00 0 1 02 03 0 4 05 06 0 7
I N
0 0 10
0 1 11
0 2 12
0 3 13
0 4 14
0 5 15
0 6 16
0 7 17
S 0 S 1
O U T
0 0 04
0 1 05
0 2 06
0 3 07
U P ZP
Et her net C AN open M ot i o n
LAN 1 LAN 2 C AN 1 C AN 2
Chapter 5 Installation
5-7
5_