Movedigit - Delta Electronics DVP15MC11T Operation Manual

DVP15MC11T Operation Manual
8.4.4

MoveDigit

FB/FC
FC MoveDigit is used for moving digits.

Parameters
Parameter
Meaning
name
In
InPos
InOutPos
Size
InOut
In
InPos
InOutPos
_8
Size
InOut
Note:
The symbol ● indicates that the parameter is allowed to connect to the variable or constant of the data type.

Function Explanation
MoveDigit moves Size digits from InPos of move source In to InOutPos of move destination InOut.

Precautions for Correct Use

The instruction has no output but input parameter.

The move can not be performed if the value of Size is 0.

If the value of InPos exceeds the range of the data type of In, the move will not be performed.
8-22
Input/
Output
Input
Input
Move source
signal
Input Position of digit in In to
Input
signal move
Input Position of digit in Out to
Input
signal receive the digit
Input
Input Number of digits to move
signal
Input
Input
Move destination
signal
Bit string
● ● ● ● ● ●
●
●
●
● ● ● ● ● ●
Explanation

MoveDigit

EN ENO
In
In Pos
InOu tPos
Size
InO ut
Description
Depends on the data type of the variable
that the input parameter is connected to.
Depends on the data type of the variable
that the input parameter is connected to.
Depends on the data type of the variable
that the input parameter is connected to.
Depends on the data type of the variable
that the input parameter is connected to.
Depends on the data type of the variable
that the input parameter is connected to.
Integer
● ●
● ●
Applicable
model
DVP15MC11T
Valid range
Real
Time, date
number