Introduction; Preface - Siemens SIMATIC RF650R Configuration Manual

Introduction

1.1

Preface

Purpose of this document
This manual contains all the information required for the parameter assignment and
commissioning of the RF650R, RF680R and RF685R readers of the SIMATIC RF600
system.
This manual is intended for:
● Commissioning engineers
● Configuration engineers
● Service technicians
Scope of validity of this document
This documentation is valid for all supplied versions of the SIMATIC
RF650R/RF680R/RF685R readers and describes the delivery state as of 10/2015 and
firmware version V2.1.
Registered trademarks
SIMATIC
trademarks of Siemens AG.
Documentation classification
You will find further information on the properties, technical specifications and possible
applications of the RF650R, RF680R and RF685R readers in the "SIMATIC RF600 System
Manual (https://support.industry.siemens.com/cs/ww/en/view/22437600)".
You will find more information on operating the readers via communications modules
(PROFIBUS operation) in the manuals of the relevant communications module
(https://support.industry.siemens.com/cs/ww/en/ps/15105/man).
For S7 programmers who create their own command and acknowledgment frames, the
communications rules and frames that are required can be found in the Appendix in the
section "Command and acknowledgement frames (Page 260)". XML programmers will find
the required communications rules and frames in the section "XML interface (Page 139)".
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
, SIMATIC RF , MOBY
® ®
, RF MANAGER and SIMATIC Sensors
® ®
1
are registered
®
7