Transponder Processing - Siemens SIMATIC RF650R Configuration Manual

XML interface
8.3 XML commands
Parameter
Parameter
value_id
value_readerType
value_mLFB
value_hWVersion
value_fWVersion
value_version
8.3.3

Transponder processing

This section describes all the commands with which you can control the processing of the
transponder data. There are two ways of querying transponder data:
● Synchronous transponder command
Commands that return the transponder data in the reply frame.
The reader executes the required action once and then sends back the acquired
transponder data.
Algorithms that work with individual transponder commands such as
"Read/WritePowerBoost" and "Read/WriteRetry" are active.
● Asynchronous transponder events
"TagEventReports" are sent by the reader to the user application on the reader's
initiative.
The transponder data is acquired only by triggers of the read point. The configuration of
the reader opens up numerous options for the trigger configuration of a read point.
You specify the message content contained in the reply frames using the tag events in the
WBM. You will find more information on the tag events in the section "The "Settings -
Communication" menu item (Page 66)".
168
Type Values
Decimal value 0...4294967295
0...9
Fixed values SIMATIC_RF680R
SIMATIC_RF685R
Alphanumeric text --
Alphanumeric text --
Alphanumeric text --
Alphanumeric text --
Description
Unique command identifier
Reader type
SIEMENS article number of the reader
Example: 6GT2811-6AA10-0AA0
Hardware version of the reader
Example: V1.0.0.0_1.1.0.34
Firmware version of the reader
Example: V1.0.0.0_1.1.0.34
Reader-specific version of components
Note that the number of sub-versions
can change.
In future versions, there may be more
or less sub-versions.
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03