Siemens SIMATIC RF650R Configuration Manual page 34

Configuring with the WBM
6.1 Starting WBM
Figure 6-1
Note
The connection to the reader cannot be established
If no connection can be established to the reader, check the following points:
• Make sure that all cables are correctly connected.
• Make sure that the reader has started up ("RS LED" lit/flashing green).
• Check the IP address of the PC/reader and the subnet mask (you will find further
information on this in the section "Assign the IP address / device name (Page 22)").
• Make sure that the connection is not blocked by a firewall.
• Check the connection between the PC and reader using a ping request.
34
The start page of the WBM
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03