Introduction - Siemens SIMATIC RF310M Operating Instructions Manual

Introduction

Purpose of this document
These operating instructions contain information required for commissioning and using the
SIMATIC RF310M device.
The documentation is intended for commissioning engineers and machine operators who
commission the application themselves, and it describes the functions of the "SIMATIC RF-
MANAGER RF310M" software and the "SIMATIC RF310M" software.
Scope of validity of this document
This documentation is valid for the SIMATIC RF310M mobile reader and describes the
delivery status as of August 2013.
Further information
These instructions are a supplement to the User Manual of the basic device WORKABOUT
PRO3.
The documentation "Workabout Pro3 Hand-Held Computer C Version Quick Start Guide",
"WORKABOUT PRO Hand-Held Computer Regulatory & Warranty Guide", "Microsoft
Windows CE End User License Agreement", "PSION SOFTWARE END USER LICENSE
AGREEMENT" and "Information on Commissioning" ships with the device.
Please note the information they contain.
You will find further information in the User Manual WORKABOUT PRO3 or in the
documentation "WORKABOUT PRO Desktop Docking Station Quick Start Guide" and
"WORKABOUT PRO Desktop Docking Station Guide".
Conventions
The following terms/abbreviations are used synonymously in this document:
● tag, transponder, mobile data memory (MDS), data carrier
● Mobile reader, reader, handheld terminal, handheld; write/read device
SIMATIC RF310M Mobile Reader
Operating Instructions, 10/2013, J31069-D0191-U001-A6-7618
1
9