Siemens SIMATIC RF650R Configuration Manual page 182

XML interface
8.3 XML commands
Reply
<frame>
<reply>
</filterDataAvailable> // opt
</reply>
</frame>
// opt → Optional: Line can be omitted.
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 211)".
Parameter
Parameter
value_id
value_
sourceName
182
<id> value_id </id>
<resultCode> 0 </resultCode>
<writeTagID>
<returnValue>
<tag>
<tagID> value_tagID </tagID>
<tagPC> value_tagPC </tagPC>
<utcTime> value_utcTime </utcTime>
<antennaName> value_antennaName </antennaName>
<rSSI> value_rSSI </rSSI>
<channel> value_channel </channel>
<power> value_power </power>
<polarization> value_polarization </polarization> // opt
<commandRetry> value_commandRetry </commandRetry> // opt
<airRetry> value_airRetry </airRetry> // opt
<filterDataAvailable> value_filterDataAvailable
</tag>
</returnValue>
</writeTagIDs>
Type
Decimal value
0...9
Text
// opt
// opt
Values Description
0...4294967295 Unique command identifier
-- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Configuration Manual, 10/2015, C79000-G8976-C386-03
// opt
// opt
// opt
// opt
SIMATIC RF650R/RF680R/RF685R