Introduction - Siemens SIMATIC RF1060R Operating Instructions Manual

Introduction

Purpose of these operating instructions
This documentation provides you with an overview of the installation and programming of the
SIMATIC RF1060R reader. The operating instructions are intended for users and
programmers involved in configuration, commissioning and servicing of the SIMATIC
RF1060R.
Registered trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ®, MOBY ®, RF-MANAGER ® and SIMATIC Sensors ®
Description
Companies have been using RFID-based identification card systems for years to control
access to buildings. With the increasing need for security and growing requirements for
documentation, solutions are demanded with which access to machines and plants can be
controlled on a user basis. The SIMATIC RF1060R reader provides the option of using
employee identification cards also when operating machines. This allows finely graded
access concepts to be implemented or user-specific instructions zo be stored - all with one
card.
Figure 1-1
SIMATIC RF1060R
Operating Instructions, 05/2017, C79000-G8976-C432-02
Product photo of the SIMATIC RF1060R
1
are
®
5