Siemens SIMATIC RF650R Configuration Manual page 47

Figure 6-6
Read point name
In the input box, you can assign a name to the read point (e.g. "incoming goods gate 5" or
"welding robot 21").
Assigned antennas
In the "Assigned antennas" area, you can assign each read point 1 to 4 antennas depending
on the connected reader type. To do this, select the check boxes of the relevant antennas in
the list. If an antenna has already been assigned to a read point, a green icon is displayed
on the right. If the check box is enabled, the antenna is assigned to the selected read point.
To specify antenna parameters for the individual antennas, select the required antenna in
the list.
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
The "Settings - Read points" menu item
Configuring with the WBM
6.3 The menu items of the WBM
47