User-Specific Procedures - Siemens SIMATIC RF650R Configuration Manual

Description

3.2 User-specific procedures

Figure 3-4
All 3 readers can be integrated in an IT environment (XML). The RF68xR readers can be
integrated both in an IT and in an automation environment (S7).
The RF685R reader can also be operated without external antennas.
3.2 User-specific procedures
The SIMATIC RF650R, RF680R or RF685R UHF readers are preconfigured when shipped
and can be put into operation without any further configuration. When shipped from the
factory, the readers are preconfigured as follows:
● First antenna connector set
● Transmit power: 20 dBm
● IP address:
– RF650R: 192.168.0.254
– RF680R/RF685R: DHCP
As described in the previous section, the SIMATIC UHF readers RF650R, RF680R and
RF685R are designed for different environments and requirements.
If you operate the RF680R and RF685R readers in an automation environment, they are
configured and programmed from the perspective of an S7 user. Integration in third-party
controllers is, of course, also possible. If you operate the RF650R, RF680R and RF685R
readers in an XML environment, they are configured and programmed from the perspective
of an XML user.
If you want to adapt the readers to your requirements, we recommend the following user-
specific procedure:
14
RF685R in an IT environment, without external antenna
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03