Siemens SIMATIC RF650R Configuration Manual page 216

XML interface
8.4 XML EventReports
Parameter
Parameter
value_id
value_
sourceName
value_tagID
value_tagPC
value_event
value_utcTime
value_
antennaName
value_rSSI
rSSIMin
216
Type Values
Decimal value 0...4294967295
0...9
Text --
Hexadecimal --
value
0...9, A...F
Hexadecimal --
value
0...9, A...F
Fixed values New
Glimpsed
Observed
Lost
Time --
Fixed values Antenna01
Antenna02
Antenna03
Antenna04
Decimal value 0...255
0...9
Decimal value 0...255
0...9
Description
Unique command identifier
Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
EPC-ID in "RAW Hex Data Format".
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Optional
Tag PC (Protocol Control)
16-bit value represented by four hexa-
decimal characters.
Example:
The value "1234" corresponds to the
binary value "0001.0010.0011.0100".
The transponder events are also gen-
erated by a smoothing algorithm in the
read point. The algorithms are speci-
fied in the WBM.
A report can also contain more than
one event for the same transponder.
Each individual event has its own tran-
sponder structure.
If a report contains two events for the
same transponder, two transponder
structures exist with the same "val-
ue_tagID" but different values for "val-
ue_event".
UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Name of the antenna
RSSI value
The lowest RSSI value with which the
transponder was detected. This is a
value without a unit and without direct
reference to the power strength.
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03