Siemens SIMATIC RF650R Configuration Manual page 187

Parameter
Parameter
value_id
value_
sourceName
value_tagID
value_tagPC
value_bank
value_
startAddress
value_dataLength
value_password
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
Type Values
Decimal value 0...4294967295
0...9
Text --
Hexadecimal --
value
0...9, A...F
Hexadecimal --
value
0...9, A...F
-- 0...3
Decimal value 0...65535
0...9
Decimal value 1...1024
0...9
Hexadecimal 00000000...
value FFFFFFFF
0...9, A...F
XML interface
8.3 XML commands
Description
Unique command identifier
Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Optional
EPC-ID in "RAW Hex Data Format".
This function applies to all transpond-
ers with this ID.
If this parameter is empty or not even
transferred, the function applies to all
transponders. Nevertheless only one
transponder is then permitted in the
antenna field.
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Optional
Tag PC (Protocol Control)
16-bit value represented by four hexa-
decimal characters.
Example:
The value "1234" corresponds to the
binary value "0001.0010.0011.0100".
Memory bank of the transponder
0: Reserved
•
1: EPC
•
2: TID
•
3: USER MEMORY
•
Start address of the first byte in the
memory bank where reading will start.
Number of bytes to be read.
Optional
Access password for the transponder
This parameter does not need to be
defined if there is no password protec-
tion activated for the transponder.
187