Siemens SIMATIC RF650R Configuration Manual page 195

Reply
<frame>
<reply>
</filterDataAvailable> // opt
</reply>
</frame>
// opt → Optional: Line can be omitted. In the reply, the parameter is transferred depending
on the configuration settings (engineering/communication).
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 211)".
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
<id> value_id </id>
<resultCode> 0 </resultCode>
<readTagField>
<returnValue>
<tag>
<tagID> value_tagID </tagID>
<tagPC> value_tagPC </tagPC>
<success> value_success </success>
<utcTime> value_utcTime </utcTime>
<antennaName> value_antennaName </antennaName>
<rSSI> value_rSSI </rSSI>
<channel> value_channel </channel>
<power> value_power </power>
<polarization> value_polarization </polarization> // opt
<commandRetry> value_commandRetry </commandRetry> // opt
<airRetry> value_airRetry </airRetry> // opt
<tagField>
<fieldName> value_fieldName </fieldName>
<bank> value_bank </bank>
<startAddress> value_startAddress </startAddress>
<dataLength> value_dataLength </dataLength>
<data> value_data </data>
</tagField>
...
<tagField>
...
</tagField>
</tag>
...
<tag> // opt
...
</tag> // opt
</returnValue>
</readTagField>
<filterDataAvailable> value_filterDataAvailable
// opt
// opt
// opt
// opt
XML interface
8.3 XML commands
// opt
// opt
// opt
// opt
// opt
// opt
195