Siemens SIMATIC RF650R Configuration Manual page 176

XML interface
8.3 XML commands
</reply>
</frame>
// opt → Optional: Line can be omitted. In the reply, the parameter is transferred depending
on the configuration settings (Settings - Communication).
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 211)".
Parameter
Parameter
value_id
value_
sourceName
value_duration
value_unit
value_tagID
value_utcTime
value_
antennaName
176
Type Values
Decimal value 0...4294967295
0...9
Text --
Decimal value 0...65535
0...9
Fixed values Time
Count
Hexadecimal --
value
0...9, A...F
Time --
Fixed values Antenna01
Antenna02
Antenna03
Antenna04
Description
Unique command identifier
Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
Optional
Duration for which the selected read
point will read transponders.
If the value "0" is set or the parameter
is empty, only one read cycle is exe-
cuted.
Optional
Specifies the unit for the duration.
Time = time in milliseconds
•
Count = number of inventories
•
If no value is set, the duration is speci-
fied in milliseconds.
EPC-ID in "RAW Hex Data Format".
Example of a 96-bit EPC-ID:
3005FB63AC1F3681EC880468
For additional information, refer to the
"EPC Global Specification".
Optional
UTC time stamp (Universal Time Co-
ordinated) in ISO 8601 format:
yyyy-MM-ddTHH:mm:ss.fffzzz
e.g.: 2009-12-24T18:34:56.929+00:00.
Optional
Name of the antenna
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03