Getconfigversion - Siemens SIMATIC RF650R Configuration Manual

XML interface
8.3 XML commands
Parameter
Parameter
value_id
value_configData
value_configID
8.3.2.3

getConfigVersion

This command requests the version of the configuration stored on the reader.
Command
<frame>
<cmd>
</cmd>
</frame>
Reply
<frame>
<reply>
</reply>
</frame>
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 211)".
152
Type
Decimal value
0...9
CDATA
Alphanumeric text
<id> value_id </id>
<getConfigVersion/>
<id> value_id </id>
<resultCode> 0 </resultCode>
<getConfigVersion>
<returnValue>
<configID> value_configID </configID>
</returnValue>
</getConfigVersion>
Values Description
0...4294967295 Unique command identifier
-- Configuration data
The parameter must be embedded in a
CDATA segment.
-- Unique identifier of the transferred
configuration
The ID can also be read out with the
"getConfigVersion" command.
Configuration Manual, 10/2015, C79000-G8976-C386-03
SIMATIC RF650R/RF680R/RF685R