Abbreviations And Naming Conventions - Siemens SIMATIC RF650R Configuration Manual

Introduction

1.2 Abbreviations and naming conventions

Specifications
The Ident blocks in the manual are based on the "Proxy Ident Function Block" protocol. You
can obtain the specification of the "Proxy Ident Function Block" from the PROFIBUS User
Organization. You will also find further information on the Ident blocks and the Ident profile in
the manual "Ident profile and Ident blocks, standard function for Ident systems
(https://support.industry.siemens.com/cs/ww/en/view/106368029)".
At several points, the manual references the "EPCglobal Specification". This standard
essentially describes the communication between transponders and RFID readers. You will
find the specification on the Internet at "GS1 (http://www.gs1.org)"
History
The following edition(s) of the configuration manual have been published up to now:
Edition
10/2014
07/2015
10/2015
1.2 Abbreviations and naming conventions
The following terms/abbreviations are used synonymously in this document:
Write/read device (SLG)
Mobile data storage unit (MDS)
Interface module (ASM)
8
Note
First edition
Revised and expanded edition.
Expansion of the documentation by the following:
PROFIBUS connection
•
MRP and SNMP capability
•
Capability of processing transponders of the ISO 18000-6B standard
•
Revised and expanded edition
Readers
Transponder, tag
Communications module (CM)
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03