Siemens SIMATIC RF650R Configuration Manual page 179

</filterDataAvailable> // opt
</reply>
</frame>
// opt → Optional: Line can be omitted.
The error codes for negative replies ("resultCode" ≠ 0) are described in the section "Negative
XML replies (Page 211)".
Parameter
Parameter
value_id
value_
sourceName
value_duration
value_unit
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
<channel> value_channel </channel>
<power> value_power </power>
<polarization> value_polarization </polarization> // opt
<inventoried> value_inventoried </inventoried> // opt
<filterDataAvailable> value_filterDataAvailable
</tag>
...
<tag> // opt
...
</tag> // opt
</returnValue>
</getObservedTagIDs>
Type
Decimal value
0...9
Text
Decimal value
0...9
Fixed values
Values Description
0...4294967295 Unique command identifier
-- Read point name
The name is specified using the WBM
(refer to the section "The "Settings -
Read points" menu item (Page 46)").
In the standard configuration, there is
only one read point with the name
"Readpoint_1".
0...65535 Optional
Period of time for which the selected
read point should read transponders.
If a value "0" is set or the parameter is
empty, the transponders are returned
immediately to the "Observed" status
without a time or a read cycle being
executed.
This behavior is particularly interesting
when the data source is controlled by
other points (e.g. inputs).
Time Optional
Count
Specifies the unit for the duration.
Time = time in milliseconds
•
Count = number of inventories
•
If no value is set, the duration is speci-
fied in milliseconds.
XML interface
8.3 XML commands
// opt
// opt
179