Siemens SIMATIC RF650R Configuration Manual page 227

Functions of the LED status bar (RF680R/RF685R)
With the LED operating display, you can read out the various operational statuses of the
readers. The LED status display of the RF680R and RF685R readers has several functions.
Among other things, the status display performs the following functions:
● Starting up the reader
The startup process of the reader is displayed by a status bar lit yellow. After the basic
Initialization, the reader requires several seconds before it is operational. This phase is
indicated by a status bar flashing yellow. During a firmware update, the startup takes
longer.
The reader is ready for operation when the "R/S" LED is lit/flashes green. If the "R/S"
LED is flashing, the reader is waiting for a connection. If the "R/S" LED is lit constantly,
the reader is connected to the controller or PC.
● Error display
If there is an error, the actual error is indicated by the lighting/flashing pattern. The "ER"
LED of the LED operating display also flashes. You will find more information on error
messages in the section "Error messages (Page 232)".
● Display of RF activity
Indicates whether or not the reader is sending via the antenna (constant green), whether
or not transponders were detected by the reader (flashing yellow) and whether or not a
transponder was sent to the user application (constant yellow).
● Indication of the quality of the antenna alignment (RSSI)
When aligning the antenna, using the WBM, the status display indicates the RSSI value
with which the transponder was detected. You will find more information on the antenna
alignment in the section "The "Settings - Adjust antenna" menu item (Page 71)".
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 10/2015, C79000-G8976-C386-03
Service and maintenance
9.1 Diagnostics
227