Working With Mode-Specific Menus - Siemens Acuson S1000 Instructions For Use Manual

Doppler Settings
Example
PW
5.3 MHz
68 dB DR 55
Map F
GS 1.5
PRF 7102
F 320
M-mode Settings
Example
GEN
8.00 MHz
2 dB DR 55
MapB / E1
T 2

Working with Mode-Specific Menus

When you activate an imaging mode, the system displays the related settings for the selected
mode on the touch screen. For systems without a touch screen, the system displays the related
settings on the left side of the image screen.
Note: Not all settings can be changed using all methods.
To work with mode-specific menus:
●
Press the control for the required mode. Or, select the tab for the required mode on the
touch screen.
○ For systems without a touch screen, click the Hide or Show Menu icon in the toolbar to
display the image menu on the left side of the screen.
I n s t r u c t i o n s f o r U s e
Parameter
Pulsed wave Doppler (PW) or continuous wave Doppler (CW)
Transmit frequency
Gain / dynamic range
Map
Size of gate
Pulsed repetition frequency
Wall filter
Parameter
2D-mode image optimization, for example, general imaging (GEN) or tissue harmonic
imaging (THI)
Transmit frequency
Gain / dynamic range
Map / edge enhancement
Tint
4 E xa m i n a t i o n F u n d a m e n t a l s
4 - 2 3