Show Banner - Network Critical SmartNA-X User Manual

96 | Command Line Reference | SmartNA-X 1G/10G Modular
Example
CONTROLLER>set banner 1 This SmartNA-X device is
CONTROLLER>set banner 2 filtering for HTTP/S packets entering VLAN 23 on the
CONTROLLER>set banner 3 main data network.

show banner

Use the show banner command to display the current banner message.
Syntax
show banner
Parameters
This command has no arguments or keywords.
Example
Report the system name:
CONTROLLER>show banner
Banner message line 1
Banner message line 2
Banner message line 3
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited