Set Name; Show Location; Set Location - Network Critical SmartNA-X User Manual

94 | Command Line Reference | SmartNA-X 1G/10G Modular
Parameters
This command has no arguments or keywords.
Example
Report the system name:
CONTROLLER>show name
NC-unit14 copper SFP+ mixed

set name

Use the set name command to enter a system name for the device installation.
Syntax
set name name-info
Parameters
name-info Specify a name for the system using 1-19 alphanumeric characters. Commas and other punctuation characters
may be used but may be replaced on RADIUS servers by underscores "_".
Example
Set name information to "Network Critical SmartNA-X":
CONTROLLER>set name Network Critical SmartNA-X
CONTROLLER>show name
Network Critical SmartNA-X

show location

Use the show location command to report location details (blank by default).
Syntax
show location
Parameters
This command has no arguments or keywords.
Example
Report location details:
CONTROLLER>show location
boston_data-center rack32D

set location

Use the set location command to enter location information for the device installation.
Syntax
set location location-info
Parameters
location-info Specify location details using 1-19 alphanumeric characters. Commas and other punctuation characters may
be used but may be replaced on RADIUS servers by underscores "_".
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited