Snmp Delete View; Snmp Show Access - Network Critical SmartNA-X User Manual

156 | Command Line Reference | SmartNA-X 1G/10G Modular
CONTROLLER>snmp create view viewName include .iso 0xf0
CONTROLLER>snmp create view viewName include .iso
CONTROLLER>snmp create view viewName include .iso.org.dod.mgmt 0xf0
CONTROLLER>apply

snmp delete view

Use the snmp delete view command to delete a viewName.
Syntax
snmp delete view viewName oid-string
Parameters
• viewName Specify the viewName to delete. Note that viewNames are case sensitive—viewName and ViewName are
not the same.
oid-string Specify the OID string that applies to this view. The string must be specified in standard OID format, for
•
example, .1.3.6.1.2.1.1 (this is the OID string of the system subtree).
Examples
• Delete the viewName with OID string .1:
CONTROLLER>snmp delete view viewName .1
• Delete the viewName with OID string sysUpTime.0:
CONTROLLER>snmp delete view viewName sysUpTime.0

snmp show access

Use the snmp show access command to list VACM Access Table group entries. The VACM Access Table is used to store
the access rights defined for groups.
Syntax
snmp show access
Parameters
This command has no arguments or keywords.
Example
Show group access rights information:
CONTROLLER>snmp show access
Access number 0
group name : g1
Security Model : any
Security Level : auth
read view : readviewA
write view : writeviewA
notify view : notifyviewA
Access number 1
group name : groupNameB
Security Model : usm
Security Level : priv
read view : readviewB
write view : writeviewB
notify view : notifyviewB
...
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited