Network Critical SmartNA-X User Manual page 12

12 | Introduction | SmartNA-X 1G/10G Modular
Table 1: SmartNA-X default settings
Function
Console port connection
IPv4 settings
IPv6 settings
Web management
SNMP
User accounts
Idle timeout
Default settings
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
15 minutes
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited
Baud Rate: 9600 bps
Data bits: 8
Stop bits: 1
Parity: None
IPv4 address: 192.168.254.100
Subnet: 255.255.255.0
Gateway: None
DNS server: None
IPv6 link local address: Automatic
IPv6 address: None
IPv6 prefix length: None
IPv6 gateway: None
HTTP Secure Server: Enabled
HTTP Secure Server Port: 443
Web management Timeout: 1 minute for an incorrectly
ended session (browser closed without logging out or a
dropped connection)
SNMP Agent: Disabled
Community strings: None configured
Auditor
• Permissions: Read only
• Username: audit
• Password: audit
Operator
• Permissions: Read-write access to port and module
settings. Read-only access to system-wide settings.
• Username: user
• Password: user
Administrator
• Permissions: Read-write access to all port, module
and system-wide settings.
• Username: admin
• Password: admin