System Name, Contact And Location; Show System; Show Name - Network Critical SmartNA-X User Manual

System name, contact and location

This section provides reference information for system name, contact and location commands.

show system

Use the show system command display information about the system, including device name, contact and location
information, MAC, network interface addresses (IPv4 and IPv6), chassis up time and PSU status. Details are also provided
for the modules that are present in the chassis slots.
Syntax
show system
Parameters
This command has no arguments or keywords.
Example
CONTROLLER>show system
Device Name: Network Critical
Device Contact:
Device Location:
MAC address: 00:1e:ff:63:42:89
IPv4 Addressing Mode : static
IPv4 Address: 192.168.0.126
IPv4 Netmask: 255.255.255.0
IPv4 Gateway: 192.168.0.254
IPv4 DNS Server: None configured
Stored IPv6 Global Address : ::
Stored IPv6 Prefix Length : 0
Stored IPV6 Gateway : ::
IPv6 Link Local Address : fe80::25d:ffaf:fe86:4399
Active IPv6 Global Address : ::
Active IPv6 Prefix Length : 0
Active IPv6 Gateway : ::
SNMP: on
Chassis Type: 1U
Power Supply 1: UP
Power Supply 2: DOWN
Time and Date: 18:58:53 Sun 22 Feb 2015
System Timeout: 15 minutes
Slot 0: 5502 MODULE_SFPPLUS_SFP
Slot 1: MODULE_ABSENT
Slot 2: MODULE_ABSENT
Slot 3: MODULE_ABSENT
Slot 4: MODULE_ABSENT
CONTROLLER>

show name

Use the show name command to report the system name details.
Syntax
show name
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited
SmartNA-X 1G/10G Modular | Command Line Reference | 93