Snmp Delete User; Snmp Show Sectogroup - Network Critical SmartNA-X User Manual

152 | Command Line Reference | SmartNA-X 1G/10G Modular
SHA sha-passphrase Set Secure Hash Algorithm (SHA) encryption and a passphrase consisting of 8–64 ASCII
•
non-control characters used to authenticate the user. SHA is a cryptographic hash function producing a 512-bit
hash value.
• Priv_None, AES, DES Specify whether message privacy is to be used, and if so whether to use AES or DES:
Priv_None Set no privacy. This is the default option if privacy is not specified.
•
• AES aes-passphrase Set Advanced Encryption Standard (AES) encryption and a passphrase consisting of 8–64
ASCII non-control characters used to authenticate the user. AES has a fixed block size of 128 bits, and a key size
of 128, 192, or 256 bits.
• DES des-passphrase Set Data Encryption Standard (DES) encryption and a passphrase consisting of 8–64 ASCII
non-control characters used to authenticate the user. DES has a block size of 64 bits and a key size of 56-bits.
Local, RemoteEngineID Set the location of the agent that receives SNMPv3 inform messages, either local (most
•
cases) or remote. If the agent is remote, you must also specify the Engine ID of the remote agent.
Examples
• Create a local user (no authentication or privacy encryption):
CONTROLLER>snmp create user username
CONTROLLER>apply
• Create local user with MD5 authentication encryption and DES privacy encryption:
CONTROLLER>snmp create user username md5 md5-passphrase des des-passphrase
CONTROLLER>apply
• Create remote user with SHA authentication encryption and AES privacy encryption:
CONTROLLER>snmp create user username sha sha-passphrase aes aes-passphrase remote EngineID
CONTROLLER>apply

snmp delete user

Use the snmp delete user command to delete SNMPv3 users.
Syntax
snmp delete user username [ local | remote remote-engineID ]
Parameters
• username Specify the SNMPv3 username to delete.
• Local, RemoteEngineID Specify if the user is a local or a remote user. If specifying a remote user then the Engine ID
of the remote management agent is required. Local is assumed if neither option is specified.
Examples
• Delete a local user:
CONTROLLER>snmp delete user username
CONTROLLER>apply
• Delete a remote user:
CONTROLLER>snmp delete username remote engineID
CONTROLLER>apply

snmp show sectogroup

Use the snmp show sectogroup command to show all existing Security To Group (sectoGroup) tables.
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited