Delete User; Set User Level; Set User Password - Network Critical SmartNA-X User Manual

delete user

Use the delete user command to remove local user accounts. This command cannot be used to manage users on a
RADIUS/TACACS+ server.
Syntax
delete user username
Parameters
username Specify the username of the account to be deleted.
Example
Delete user admin1:
CONTROLLER>delete user admin1
Deleting user admin1

set user level

Use the set user level command to change the security level of a local user. This command cannot be used to manage
users on a RADIUS/TACACS+ server.
Syntax
set user username level { 1 | 2 | 3 }
Parameters
username Specify the account username you want to administer.
•
1, 2, 3 Specify the new security level:
•
• 1 specifies Auditor level with interrogative access only
2 specifies User level access with interrogate access only to system settings and full access to traffic ports
•
3 specifies Administrator level with full access to system settings and traffic ports
•
Example
Change security level to 2 for user1:
CONTROLLER>set user user1 level 2

set user password

Use the set user password command to change the password of a local user. This command cannot be used to manage
users on a RADIUS/TACACS+ server.
Syntax
set user username password new-passwd
Parameters
• username Specify the account username you want to administer. Usernames are case-sensitive, so user and User are
not the same accounts.
new-passwd Specify the new account password. Passwords are case-sensitive and may contain 1-80 characters
•
alphanumeric characters. Spaces are not permitted.
Example
Change the password for the Administrator to 'myAdminPassword':
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited
SmartNA-X 1G/10G Modular | Command Line Reference | 103