Clear Maps - Network Critical SmartNA-X User Manual

126 | Command Line Reference | SmartNA-X 1G/10G Modular
Destination Ports:
1D
6.
Source Ports:
1B
Excluded Filters:
SMTP
Destination Ports:
3C
CONTROLLER>delete map 4
CONTROLLER>show maps
1.
Source Ports:
1A
Destination Ports:
1B
1C
2.
Source Ports:
1B
Destination Ports:
1A
3.
Source Ports:
1B
Excluded Filters:
HTTP
Destination Ports:
3D
4.
Source Ports:
1B
Required Filters:
SMTP
Destination Ports:
1D
5.
Source Ports:
1B
Excluded Filters:
SMTP
Destination Ports:
3C
CONTROLLER>commit
Committing maps and vline

clear maps

Use the clear maps command to remove all user-defined maps, packet filters, load balancing policies, and custom fields.
If you only want to remove a single instance of a map, filter or custom field, you may use these alternate commands
instead: delete map, delete filter, delete customfield. After clearing maps, enter a commit command to replace the live
settings on the device with your new configuration.
Syntax
clear maps
Parameters
This command has no arguments or keywords.
Example
CONTROLLER>clear maps
™ ©
SmartNA-X 1G/10G User Guide 1.4 2015 Network Critical Solutions Limited