Porsche 911 GT3 Cup 2018 Techical Manual page 162

Caution
 Heat up the rolex housing again to 100°C - 120°C (212-248 °F) and insert
the bearing sleeve for the additional grooved ball bearing.
Important: Ensure that the bearings sleeve is seated correctly.
Let the housing cool down.

2.10.10
 Put the potentiometer driver, the washer and the O-Ring together.
Important: The O-Ring has to be coated with grease.
2.10.12
Version: 4/20/2018
Hot components
Danger of burns
 Wear personal protective equipment.
Powertrain
2.10.11
911 GT3 Cup (991 II)
MY 2018
161