Table of Contents
Advertisement
Errorcodes
E_injector_cyl6
99
100
E_nvram
101
E_ssply1
102
E_ssply2
E_ssply3
103
E_etccal
104
E_canmsg_dyno_0
105
106
E_canmsg_dyno_1
107 E_canmsg_dyno_2
108 E_canmsg_icd_0
109 E_canmsg_icd_1
110 E_canmsg_icd_2
111 E_canmsg_ml_comp1
112 E_canmsg_ml_comp2
113 E_icmpr
114 E_tcmpr
115 E_ucmpr
116 E_accx_can
117 E_accy_can
118 E_accz_can
119 E_steer_can
120 E_yaw_can
121 E_paccu
122 Error 115
123 E_etccal_abort
124 E_prail
125 E_prail2
126 E_psdia_blipper
6.4.4 Carburation
Carburation is cylinder-selective and is created by injecting fuel into the intake ducts.
One fuel pressure sensor (low press.) of the 911 GT3 Cup (991 II), is located at the
supply line in the engine compartment. Two fuel high pressure sensors are located at
the rails.
6.4.5 Ignition system
A fully electronic ignition system is used on the 911 GT3 Cup (991 II) engine. This
means that the ignition coils receive the ignition signals directly from the ECU. The
direct-ignition coils which mounted on top of the spark plugs are extremely rugged and
temperature-resistant. Even under extreme conditions the coils provide the required
ignition energy.
For safety reasons, the engine can only be started in first gear with the clutch pedal
pressed. This prevents the vehicle from unintentionally moving off.
Version: 4/20/2018
Description
Error injector control cylinder 6
Error in NVRAM
Error in sensor supply 1
Error in sensor supply 2
Error in sensor supply 3
Error throttle calibration
Error CAN- communication dyno_0
Error CAN- communication dyno_1
Error CAN- communication dyno_2
Error CAN- communication ICD_1
Error CAN- communication ICD_2
Error CAN- communication ICD_3
Error CAN- communication compressor 1
Error CAN- communication compressor 2
Error current measurement compressor
Error temp. sensor compressor
not used
Error longitudinal acceleration via CAN
Error cross acceleration via CAN
Error vertical acceleration via CAN
Error steering angle via CAN
Error yaw capture via CAN
Error shift system sensor press.
not used
Error throttle calibration abrupt
Error in rail pressure sensor
Error in rail pressure sensor 2
Error blipper driver diagnosis
Electrical system
911 GT3 Cup (991 II)
MY 2018
323
Advertisement
Table of Contents
